Product Overview
THIS IS A TLR 22 5.0 SC MOD CONVERSION. PPP-0017
WE WILL CUT THESE PER ORDER. LEAD TIME WILL BE 2 TO 3 DAYS
FEATURES: ADJUSTABLE FRONT WHEELBASE, ADJUSTABLE KICK UP, INFINATE BUMP STEER ADJUSTMENTS, ABLE TO MOUNT SHOCKS ON FRONT SIDE OF REAR ARMS, SLIDING BATTERY, LEFT SIDE BATTERY MOUNTING, DIRECT SERVO TO STEERING RACK MOUNTING, LOWERING KIT, 3MM AMERICAN MADE CARBON!!
INSTRUCTIONS. KIT COMES WITH:
3MM CARBON:
CHASSIS PLATE
L+R CHASSIS STIFFNER
FRONT SHOCK TOWER FRONT
WHEELBASE SLIDE
4X STEERING RACK SPACERS (2 SPACERS TO START, ADJUST ACKERMAN AS NEEDED WITH OTHER 2)
REAR SHOCK TOWER (USE BOTTOM HOLES TO TRANS MOUNT)
PPP-0100S.4 ORING BATTERY MOUNT
RIGHT SIDE MID BODY POST MOUNT
PPP-0127 REAR BODY POST MOUNT
3D PARTS
PPP-0937 SERVO MOUNT
PPP-0913 2X REAR TRANS SHOCK TOWER MOUNT (NOTCH SIDE FOWARD)
PPP-0900 REAR BODY 3D MOUNT (20MM BOLTS THRU THIS SHOCK TOWER AND REAR TOWER MOUNT) NUTS ON FRONT SIDE
PPP-0914.8 REAR 8MM LOWERING KIT
2 8MM SPACERS (1 FOR STEERING RACK)
6 2MM SPACERS (4 SPACERS FOR SHOCK MOUNTS, 2 SPACER FOR REAR HUB, RR ALL THE WAY BACK, LR ALL WAY FORWARD)
HARWARE
PPP-0520 ADJUSTABLE KICK UPS DRILLED 3.5MM TO ACCEPT LOSI PIN
PPR-0778 M3 MOUNT (FOR MOUNTING STEERING RACK TO SHOCK TOWER)
LONG SHOCK EYES X 2 AND 20MM STUD FOR STEERING (50MM EYE TO EYE)
10X 3MMX 10MM COUNTER SUNK BOLTS (FOR FRONT SLIDE AND SIDE RAILS)
2X 16MM COUNTER SUNK (CHASSIS THRU STIFFNER AND RIGHT SIDE BODY POST EXTENDER)
4X 25MM COUNTERSUNK (REAR TRANNY WITH 9MM LOWERING KIT)
4X 3MMX 20MM BUTTON HEAD (FOR REAR SHOCK TOWER TO MOUNT 4 NUTS ON FRONT SIDE)
4X12MM BUTTON 18 3MM LOCKNUTS
NEEDED TO COMPLETE LOSI 22 5.0 BUGGY KIT LONGER FRONT SPINDLE SUCH AT CW7258 X 2 OR TLR232062 (IF USING THE CUSTOM WORKS FRONT HEX YOU WILL NEED SPACER THAT IS BETWEEN BEARINGS ON OUTSIDE OF HUB. WILL ALSO NEED CW SPACER KIT LISTED BELOW) ASSOCIATED 71113 91MM DOGBONES (DIFF MAY REQUIRE SLIGHT CLEARANCING) 2 7/8 REAR CAMBER LINKS (72MM) CW1275 ROCKET BUMPER MOUNT CW7281 8MM REAR HEX CW3280 REAR ARMS (MUST CUT FRONT INSIDE OF ARMS DOWN TO 1.3" OR 33MM) IF THE ARMS ARE ADDED WE WILL TRIM THEM PPP357/PPP300 FRONT BUMPER KIT (300 KIT COMES WITH CW1275 BUMPER MOUNT AND SPACERS. CHOOSE WIDTH FOR NOSE WIDTH PUNISHER BODY IS 6-6.5") MID BODY POSTS 4.5", 2 1/2 REAR. OPTIONAL PARTS AND ADD ONS PPP206 PUNISHER SC MOD BODY CW1820 BIG BORE SPRING KIT CW7049 SHIM KIT (WHEN USING CW OR AE SPINDLES) PPP107 EXTENDED CARBON MOTOR PLATE CW3269 BRASS LR ARM
