"MATRIX" ASSOCIATED B6-b6.4 BASED SPRINT (ADJUSTABLE OFFSET)

PPP015 MATRIX SPRINT CONVERSION

This is a .6" adjustable offset Associated B6.1-B6.4 sprint conversion.

Only these parts are inlcuded.

INCLUDED:

                CARBON

Chassis plate 3 sections

Front and rear shock towers

REAR BUMPER SLIDE

Rear camber link plate

PPP100 o ring battery mount

Aluminum 25 deg kick up

                     3D PARTS

PPP905 Bulkhead

PPP906 3d rear shock tower mount

PPP937.21 SERVO MOUNT

3d printed nut holders (bumper, front slide, rear slide rear bumper slide)

3/4 STUD FOR STEERING 3/4" 

4x 35mm button head bolts for rear shock tower/ TOWER MOUNT.

4X 25MM Button head bolts for front kick up going into bulkhead.

4X 16MM CS FOR SERVO MOUNT

10X 3MM NUTS

6X 10MM CS 2X 12MM CS

2X 10MM BUTTON

If you are using LMH Quick cage release system you must add the extended rear cage mount.

This car uses same base set up as thr Pioneer except main chassis plate will be 3mm lower.

You will need the following (NOT INCLUDED) B6.3 ASC90030 donar kit or ASC90033 builders kit,  Cw3277 Adjustable rear arms CW3490 front chassis guard, CW3434 rear bumper.  Body and cage All electronics RECCOMMENDED PARTS CW1820 SPRING KIT EXO2040 EXO2035 ASC91658 PPP911 bladder spacers for 12mm shocks PPP911B 12mm bladders